GermanDE-CH-ATEnglish (UK)

VACUSPEED® quick, easy and convenient to work

Customized, fast and effective insulation

Rooms are often not rectangular and offer surprises with openings or internal corners. VACUSPEED® – the clever modular grid system allows installation with almost all commonly encountered layouts. Time-consuming manufacture of VIP special sizes is not required with VACUSPEED®. The laying pattern should not have any cross-joints and should preferably be laid with the largest sizes first. The smaller sizes usually make up the peripheries. The missing edge areas – a maximum of 15 cm circumferentially – are simply fitted in using a cuttable PU-foam strip.

 

More efficient performance

VACUSPEED® is a tremendously efficient insulating material both in terms of insulating effect and handling. Provided the simple working instructions are observed, it will be possible to achieve very good solutions with VACUSPEED® quickly, easily and flexibly and elegantly solve the majority of problems in the building structure. An even better insulating effect is obtained by installing multiple layers of VACUSPEED®. Floor construction is subsequently performed in the conventional manner. Specimen superstructures and tender texts etc. can be found on our webpage www.bau-vip.de

 

Vacuspeed Vakuum-Isolationspaneele

Reacting spontaneously.

The VACUSPEED® system is available ex warehouse at short notice and is practical in use on any construction site.

 

Vacuspeed Vakuum-Isolationspaneele

Rapid on-site delivery

Many dealers now include Vacuspeed in their ranges. Simply order and obtain a swift delivery. Our local dealers are to be found under Contacts.

PU-Schaum-Randstreifen messen

Measure boundary strips

If the Vacuspeed® panels have been laid without cross-joints, all that is needed is fill up the boundary area with PU-foam strips. First of all, precisely measure the distances from the wall.

PU-Schaum-Randstreifen messen

Trimming of PU-foam strip

Cut the PU-foam boundary strips to an exact fit using an ordinary cutter; preferably cut on a firm base.

PU-Schaumstreifen einpassen

Flexible boundary strip adjustment

The PU-foam boundary strips are easily cut to size. Corners and edges in the rooms are therefore optimally filled in and insulated. When properly laid, the boundary strip will never be wider than
15 cm.

Vacuspeed Vakuum-Isolationspaneele

Dual-layer installation

VACUSPEED® can also be installed in two layers for an even better performance. Please ensure that the top laying pattern optimally covers the joints of the bottom layer (diagonal reflection).

Vacuspeed Vakuum-Isolationspaneele

Conventional floor construction

Once the VACUSPEED® insulation has been laid, a PE separating layer is applied. A conventional floor construction, e.g. with screed can subsequently be placed on top.